Now you can set a Target Area for objectives.

Here's how it works:

Create your objective and follow these steps.

  1. In Target Value choose change to area
  2. Set Start Value - this is where progress calculation begins. This must be outside Target Area range.
  3. Set Graph Area Low - this is the low on the graph.
  4. Set Graph Area High - this is the high on the graph.

Standard Graph Example

Inverted Graph Example

With an inverted graph the numbers can becoming a little confusing. Remember that the Graph Area Low and Area High are based on the the Graph, not the value.

Therefore, with an inverted graph, the Graph Area Low is the higher number and the Start Value is a higher number still, as shown below.

Did this answer your question?